Instruction manual

Setup
Frog 2 Operating Manual – Issue 4.3 Page 63
Default Times
Press the [Default Times] key on the touch screen. The various options are shown in the
centre of the touch screen:
The Default Times options are summarised below:
• Intensity Delay Up – Range = 0 – 99:59.9, Default = 0.
• Intensity Delay Down – Range = 0 – 99:59.9, Default = 0.
• Intensity Fade Up – Range = 0 – 99:59.9, Default = 3 seconds.
• Intensity Fade Down – Range = 0 – 99:59.9, Default = 3 seconds.
• Colour Delay – Range = 0 – 99:59.9, Default = 0.
• Colour Transition – Range = 0 – 99:59.9, Default = 3 seconds.
• Beamshape Delay – Range = 0 – 99:59.9, Default = 0.
• Beamshape Transition – Range = 0 – 99:59.9, Default = 3 seconds.
• Position Delay – Range = 0 – 99:59.9, Default = 0.
• Position Transition – Range = 0 – 99:59.9, Default = 3 seconds.