Instruction manual

Setup
Page 60 Frog 2 Operating Manual – Issue 4.3
Inputs
Press the [Inputs] key on the touch screen. The various options are shown in the centre of
the touch screen:
The Inputs options are summarised below:
• SMPTE Timecode – Disabled, 24, 25 or 30 frames per sec.; Default = Disabled.
• MIDI Timecode – Disabled, 24, 25 or 30 frames per sec.; Default = Disabled.
• CAN – Disabled, iCAN or Chillinet; Default = Disabled.
• Set Time - Press the [Set Time] key on the touch screen. The Set Time Window is
displayed on the touch screen. Enter the correct time in the field provided and then
confirm by selecting the [OK] button.
• Set Date - Press the [Set Date] key on the touch screen. The Set Date Window is
displayed on the touch screen. Enter the correct Day, Month and Year in the fields
provided and then confirm by selecting the [OK] button.
• Remote Switches – Each of the six remote switches can be configured to Disabled,
Go to Cue or Macro. If the action field is set to Go to Cue or Macro, then an additional
field is displayed allowing you to enter the stack/cue or macro number as appropriate.