Instruction manual

Setup
Frog 2 Operating Manual – Issue 4.3 Page 59
Peripheral
Press the [Peripheral] key on the touch screen. The various options are shown in the
centre of the touch screen:
The Peripherals options are summarised below:
• Mouse Controls Pan/Tilt - Options Yes/No; default = No. If the mouse or trackball is
set to control pan and tilt parameters, this will only take effect when fixtures are
selected and the Position attribute is selected. In this situation, the mouse pointer is
removed temporarily from the corresponding monitor screen. In all other situations, the
mouse or trackball operation will remain unaffected.
• Soft Keyboard on Touch Screen - Options Yes/No; default = Yes. A soft keyboard
will be displayed on the touch screen during naming operations.
• Wheel Sensitivity – Adjusts the sensitivity of the control wheels. Range 0% (least
sensitive) to 100% (most sensitive); default = 50%.