Instruction manual

Setup
Page 58 Frog 2 Operating Manual – Issue 4.3
Displays
Press the [Displays] key on the touch screen. The various options are shown in the centre
of the touch screen:
The Displays options are summarised below:
• Monitor Display 1 Enabled - Yes or No.
• Monitor Display 2 Enabled – Yes or No.
• Screen Timeout (mins) – This is the time after which the touch screen back light and
monitor screen(s) will be turned off if the desk has not been used.
Range = 0 – 99 minutes; Zero = No Timeout; Default = 20 minutes. If the timeout
period is reached the touch screen backlight and monitor screen(s) will be turned off.
To restore the touch screen back light and monitor screen(s), press the touch screen or
any key on the front panel of the desk.
• Touch Screen Brightness – Range = 0 –100%, Default = 100%.
• Touch Screen Contrast – Range = 0 – 100%, Default = 50%.
• Touch Screen Calibration – Press the [Calibrate] soft key and follow the instructions
on the touch screen.
• Click on Press – Audible click on touch screen. Range = Yes or No; Default = Yes.
• Desk Lamp Brightness – Range = 0 –100%, Default = 100%.
• Monitor 1 Calibration – Calibration of touch screen monitor 1. Press the [Calibrate]
soft key and follow the instructions on the monitor screen.
• Monitor 2 Calibration – Calibration of touch screen monitor 2. Press the [Calibrate]
soft key and follow the instructions on the monitor screen.