Instruction manual

Setup
Frog 2 Operating Manual – Issue 4.3 Page 53
Multi-Part Fixtures
For multi-part fixtures (eg Lamp + Scroller) the different parts of the fixture are displayed
on separate lines in the Edit Fixtures patch table.
There is an additional column (Part) which shows the part name of the multi-part fixture
and a [Fixture Part] button that selects which part of the fixture is displayed on the screen
(eg All Parts, Lamp, Scroll).
DMX In Field
The DMX-In field in the patch table shows the DMX In address assigned to the fixture.
The DMX In channel is used to control the brightness (intensity) parameter of the fixture.
This field may be blank (ie no DMX In control) or a value between 1 and 512.
Clicking on an entry in the DMX In column allows you to change the DMX In address
assigned to the corresponding fixture.