Instruction manual

Quick Start Tutorial
Page 34 Frog 2 Operating Manual – Issue 4.3
Palettes
The Frog 2 provides the user with four sets of 200 palettes. The palettes are stored under
the nominal headings of Position, Beam, Colour and Effects.
All palettes may contain any combination of Intensity, Colour, Beamshape, Position and
Effects parameters. For example, a colour palette may include intensity and colour, a
beamshape palette could include beamshape and position etc.
Palette Windows
Each set of palettes has it’s own palette window. To display a palette window on the
monitor, hold down the SHIFT key and then press the appropriate attribute key
(POSITION, COLOUR, BEAM or EFFECTS).
The palette window contains a soft button for each of the 200 palettes. Each soft button
contains the following information:
Palette Number (1 - 200), Status Flag (* = unprogrammed), a set of content flags indicating
which attributes are programmed in the palette (I = Intensity, C = Colour, B = Beamshape,
P = Position, E = Effects) and name, if defined.
Colour Palette Window