Instruction manual

Quick Start Tutorial
Page 30 Frog 2 Operating Manual – Issue 4.3
Tagging Parameters
On the Frog 2 desk, fixture parameters must be ‘tagged’ for them to be recorded when
programming cues, palettes, UDF’s and UDK’s.
The tag status of each fixture parameter is indicated on the touch screen and in the
Program Window by it’s background colour – grey indicates that the parameter is
untagged; green indicates that the parameter is tagged.
If a parameter’s value is changed by a command, moving the control wheel or directly in
the Program Window, it will be tagged automatically.
It is also possible to tag and untag fixture parameters manually via the touch screen, by
pressing on the parameter name.