Instruction manual

Quick Start Tutorial
Frog 2 Operating Manual – Issue 4.3 Page 25
Loading Shows
Shows can be loaded onto the Frog 2 from either CD or USB Storage Device.
Insert or connect the storage medium containing the show.
Press the [Files] key on the touch screen or monitor.
Press the [Load Show] key to enter the Load Show screen.
Press the Source Device key to select the required device.
A list of show files on the currently selected storage device appears on the touch screen.
Select the show file you wish to load using the cursor keys.
Ensure that you have the correct Load Option selected (default = Load Complete Show).
Press [OK] key to load the show.
The desk will load the show into its memory and you will be returned to the home screen.
Load Show Screen
Clear Options
This section of Setup allows you to clear (delete) various components which make up the
show file (ie cue stacks, groups, palettes, UDF’s, UDK’s etc.) For full details see the Setup
section of this manual.
Exiting Setup
Once you have finished making changes to the setup, press the [Close] key in the top
corner of the Setup screen to leave Setup. You will be returned to the Home Screen.