Instruction manual

Quick Start Tutorial
Frog 2 Operating Manual – Issue 4.3 Page 21
Editing Fixtures
The Edit Fixtures screen allows you to perform the following functions on the fixtures in the
fixture schedule:
• Name individual fixtures
• Assign user fixture numbers
• Edit fixture parameter Default (release) values
• Edit fixture parameter Home values
• Edit fixture parameter Topset values
• Adjust the Pan and Tilt alignment of fixtures
• Patch Functions
Edit Fixtures Screen
Press the [Edit Fixtures] key on the touch screen or monitor. The Edit Fixtures screen is
displayed on the touch screen and the monitor:
To make changes to a particular fixture or a complete group of fixtures, first select the
fixture group. The name of the group is displayed in the header of the window.
Press the GROUP button until the required group is displayed in the touch screen header.
All the fixtures in this group are now displayed in the Edit Fixtures window.
Use the soft buttons [Default], [Home], [Topset] etc to display the required fixture data. Use
the cursor keys to move to the individual field to edit or use the ALL row to edit all fixtures
in the chosen group. Press SET to enter the field, adjust the value as required then press
ENTER.
Once all changes have been made, press the [OK] key to return to the Patch screen.