Instruction manual

Technical Specification
Page 174 Frog 2 Operating Manual – Issue 4.3
Remote Input
An 8 pin DIN connector providing 6 remote switches (common ground). Short pin to 0v to
simulate a button push.
Warning – Do NOT connect anything to the undefined pin.
Socket Pin Number Remote Switch
1
Switch 6
2
Switch 1
3
Switch 2
4
Switch 3
5
Switch 4
6
Switch 5
7
Not Used
8
0V Common Ground
SMPTE
3 pin XLR input and output.
Output 0dBm.
Input 0dBm +/- 10dBm.
47 kOhm input impedance.
Maximum 50V RMS.
Connector Pin Number Description
1 Signal Ground
2 Output
3 Input