Instruction manual

Glossary
Page 172 Frog 2 Operating Manual – Issue 4.3
Tagging The method of marking parameters to be programmed. Only Tagged
parameters are recorded. Tagged parameters are shown in orange
on the touch screen and Program Window.
Trigger The method by which a Cue is output. Triggers can be set to GO
button, automatic, Real Time, SMPTE Time, MIDI Time or CD Time.
Touch Screen The screen built into the Frog 2 desk which displays buttons for user
selection. This is full colour.
Try Cue A function that allows you to see the transition from a previous state to
the current state before recording the data into a cue.
UDF User Defined Fader. The top bank of faders on the Frog 2, which can
be defined as a number of options, according to user preference.
UDK User Defined Key. The bank of buttons top right of the control surface
which can be assigned as a number of different functions.
Unpark The function that unfreezes a fixture’s DMX output values.
USB Universal Serial Bus. A standard for the transfer and storage of
information.
VGA Video Graphics Array. The monitor outputs on the back of the Frog 2
output as Super-VGA.
Zero 88 The manufacturer of the Frog 2 desk.