Instruction manual

Other Features
Page 166 Frog 2 Operating Manual – Issue 4.3
User Views
The Frog 2 desk provides the facility to save up to 5 user defined views. A User View
defines the configuration of the windows displayed on the two monitors, for example:
Colour
Palette
Window
Beamshape
Palette
Window
Cue Stack Window
Position
Palette
Window
Effects
Palette
Window
Program Window
Monitor 1 Monitor 2
User View Toolbar
Press the VIEW key to bring up the User View Toolbar on the touch screen. Each of the
User Views has a soft button which shows the view number and name (if defined).
Unprogrammed views have a * next to the view number. For example:
View 1
K-Nine’s
View
View 2
CBPE
Palettes
View 3
Cue Stack/DMX
PW/Outputs
View 4 * View 5 *
Recording a User View
Set up the monitor displays with the required windows. Press the RECORD key, then the
VIEW key and then press the corresponding soft key in the User View Toolbar on the
touch screen. Select the [Record All] or [Record Visible] option as required.
If the selected view contains a recorded view an overwrite warning message is displayed
allowing you to confirm the overwrite or cancel the operation.
Alternatively, you can enter one of the following commands:
RECORD VIEW N ENTER Records the window configuration into view N.
RECORD VIEW N SET Allows naming of view N at the time of recording.