Instruction manual

Macros
Page 154 Frog 2 Operating Manual – Issue 4.3
CD Player Control Macros
The following in-built macros are used to control the CD player:
DPT Play track T starting at the beginning of the track. Stop at end of track.
DPT+ Play track T starting at the beginning of the track and play to the end
of the CD.
DPT - M.S.T Play track T starting at M.S.T into the track (minutes, seconds,
tenths). Stop at end of track.
DPT - M.S.T+ Play track T starting at M.S.T into the track (minutes, seconds, tenths)
and play to the end of the CD.
DS Stop (Pause) the CD player.
DR Resume playing the CD from the current position.
Examples…
DP5 Play track 5; stop at the end of track 5.
DP5 + Play track 5; stop at the end of CD.
DP7 – 1.5 Play track 7 starting at 1.5 seconds into the track; stop at end of track.
DP7 – 2.30.0 Play track 7 starting at 2 minutes 30 secs into the track; stop at end of
the track.
DP7 – 2.30.0 + Play track 7 starting at 2 minutes 30 secs into the track; stop at end of
the CD.
Note - Setting and Editing the In-built Macros
Move the cursor onto the Macro field in the Cue Stack Window and press the SET key.
A window appears on the touch screen containing a soft keyboard allowing macros to be
set or edited. They may also be entered via an external keyboard.
Macro commands are entered as a text string, and multiple commands can be
concatenated using the colon as a delimiter, for example, “G2:S3:C4:T3/4”.