Instruction manual

User Definable Keys
Page 140 Frog 2 Operating Manual – Issue 4.3
Editing User Definable Keys
To edit a UDK enter the following command: LOAD <UDK>.
This allows you to load the contents of the UDK into the Program Window, adjust the
programmed channel levels and times as required and then save the data back into the
original UDK by pressing the UPDATE key.
Note - This function only applies to UDKs which have been assigned to channel data or a
cue. In the case of a cue, you effectively load the cue into the Program Window, modify it
and update it.
Deleting User Definable Keys
Individual UDK’s can be deleted (cleared) by entering the following command:
DEL <UDK>
Where <UDK> represents pressing the actual UDK on the front panel.