Instruction manual

User Definable Keys
Page 138 Frog 2 Operating Manual – Issue 4.3
Group UDK
The Group UDK is used for selecting a group. To assign a Group to a UDK, enter either of
the following commands:
GROUP [Master Group] RECORD <UDK> (Master Group)
GROUP N RECORD <UDK> (Automatic or User Defined Group)
Where <UDK> represents pressing the actual UDK on the front panel.
When the UDK is pressed, the group assigned to the UDK is selected.
Fixture UDK
The Fixture UDK is used for selecting an individual fixture. To assign a fixture to a UDK,
enter either of the following commands:
GROUP [Master Group] F RECORD <UDK> (Master Group)
GROUP N ENTER F RECORD <UDK> (Automatic or User Defined Group)
Where F is the fixture number of the required fixture and <UDK> represents pressing the
actual UDK on the front panel.
When the UDK is pressed, the fixture assigned to the UDK is selected.
Palette UDK
The Palette UDK can be used as an alternative method of outputting a palette for the
currently selected fixtures. To assign a palette to a UDK, enter one of the following
commands:
COLOUR N RECORD <UDK>
BEAM N RECORD <UDK>
POSITION N RECORD <UDK>
EFFECTS N RECORD <UDK>
Where <UDK> represents pressing the actual UDK on the front panel.
The palette assigned to the UDK is applied to the selected fixtures when the UDK is
pressed.