Instruction manual

Cues, Stacks and Pages
Frog 2 Operating Manual – Issue 4.3 Page 113
Copying Cues
To copy a cue to another cue in the same cue stack or a different cue stack enter the
following command:
S1/C1 COPY S2/C2 ENTER (copies stack S1 cue C1 to stack S2 cue C2).
To copy a range of cues to another location enter the following command:
S1/C1 THRU C2 COPY S2/C3 (copies stack S1 cues C1 through to C2 to stack S2).
Moving Cues
To move a cue to another cue in the same cue stack or a different cue stack enter the
following command:
S1/C1 MOVE S2/C2 ENTER (moves stack S1 cue C1 to stack S2 cue C2).
To move a range of cues to another location enter the following command:
S1/C1 THRU C2 MOVE S2/C3 (moves stack S1 cues C1 through to C2 to stack S2).
Deleting Cues
To delete a single cue enter the command:
S/C DELETE or DELETE S/C ENTER.
To delete a range of cues enter the following command:
DELETE S/C1 THRU C2 ENTER.
Note – Deleting Cues
Since the Frog 2 desk is a tracking based console, deleting a cue from a cue stack could
possibly affect other cues in that stack. Think carefully about whether you need to make
any changes to subsequent cues in order to maintain the state(s) required.