Instruction manual

Cues, Stacks and Pages
Page 110 Frog 2 Operating Manual – Issue 4.3
Adding Macros to Cues
The desk provides a number of in-built macros relating to the control of cues and cue
stacks. These macros are used as commands to allow a cue to trigger another event
elsewhere on the console (see Macros chapter for full details).
Macro commands are entered as a text string in the Macro column of the Cue Stack
Window as follows:
Move the cursor to the Macro column of the required cue and press the SET key.
Type in the text for the required macro(s) and then press the ENTER key.
The syntax for the various in-built macros is defined in the Macros section of the manual.
Multiple macro commands can be entered using the colon as a delimiter, for example,
G2:S3:C4.