Instruction manual

Preset Operation
Leap Frog 48/96 Operating Manual – Issue 3 Page 79
Preset Operation
The Leap Frog 48 desk has 48 preset faders which control 24 dimmer channels in Two
Preset mode or 48 dimmer channels in Wide mode.
The Leap Frog 96 desk has 96 preset faders which control 48 dimmer channels in Two
Preset mode or 96 dimmer channels in Wide mode.
The configuration and operation of the PRESET FADERS and the A MASTER and B
MASTER faders is determined by the operating mode of the desk, the WIDE and PRESET
CONTROL keys.
The Leap Frog 48 and Leap Frog 96 desks default to WIDE Mode operation.
You can switch the desk to operate into TWO PRESET operation using the TWO PRESET
(WIDE MODE) key on Special Page 1 of the MFKs or by holding down the SHIFT key and
pressing the PRESET CONTROL key.
The FLASH MODE key, which can be found on Special Page 1 of the MFKs determines
the operation of the CHANNEL FLASH buttons.
Crossfade Time - To enable timed fades there is an internal Fade Time that is applied
when crossfading between scenes in both Two Preset and Wide modes. This internal
fade time can be found and adjusted on Special Page 1 of the MFKs, labelled Time.