Manualshelf

Instruction manual

ManualsBrandsZero88 ManualsFlood LightFROG 2
71727374757677787980
Setup
Page 76 Leap Frog 48/96 Operating Manual – Issue 3
File Menu
The File menu has three options available:
• About - displays the connection status window.
• Disconnect - disconnects the remote and returns you to the initial connection screen.
• Exit - disconnects the remote and exits the application.
The online/offline status of the remote is indicated by an icon in the menu bar.
Channel Control
The [Chan.] button in the Icon Bar is for Channel Control. This is selected as default.
At the top of the main layout area is a dropdown box, allowing you to select the bank of
faders to control (arranged in groups of six faders, channels 1-6, channels 7-12 etc).
Below this is a group of faders which can be dragged up and down, to set the fader level.
Up and Down arrow buttons at the bottom of the fader track allows incrementing in small
intervals (1%). Pressing and holding these arrow buttons will auto-repeat and after 10
small increments, will increase the increment to 5%.
These faders follow the ‘mix’ mode as set in the desk software (Preset Mix Mode).
Changing page on the dropdown box refreshes the faders to their current level for the
group selected.
Submaster Control
The [Subs.] button in the Icon Bar is for Submaster Control. At the top of the main layout
area is a dropdown box, allowing you to select the bank of faders to control (arranged in
groups of five, submasters 1-5, submasters 6-10 etc).
Next to this there are page up and page down buttons to allow you to select the required
submaster page. Below this are a group of faders which can be dragged up and down, to
set the fader level.
Up and Down arrow keys at the bottom of the fader track allows incrementing in small
intervals (1%). Pressing and holding these arrows will auto-repeat and after 10 small
increments, will increase the increment to 5%.
These faders are LTP mixed with the desk faders so a submaster can be grabbed by
either control surface and modified as required. Changing page refreshes the submaster
faders to their current level for the page selected.