Instruction manual

Setup
Page 68 Leap Frog 48/96 Operating Manual – Issue 3
Loading User Fixture Types
The desk provides a method for loading fixture types which are not
in the fixture library
stored on the desk, ie user fixture types which are stored on a memory stick. Any fixtures
which are not in the library can be made using our Fixture Tools – see our support website
at http://support.zero88.com for full information and to obtain the free software.
To load a user fixture type file, connect the storage media to a USB port on the desk. If
you are using an external floppy drive, remember to insert the floppy disk into the drive.
Press the [Files] MFK or select the [Files] button on the Setup Window.
Press the [Load UFT] MFK or select the [Load UFT] button on the monitor. The Select
User Fixture File window is displayed on the monitor:
Select the required Source Device. A list of UFT files found on the source device is
displayed in the window.
Select the required file and then select the [OK] button. All the fixture types contained in
the selected UFT file are loaded and added to the fixture library on the desk. A message
is displayed indicating how many fixture types have been loaded: