Instruction manual

Setup
Page 66 Leap Frog 48/96 Operating Manual – Issue 3
Files
This section of Setup allows you to save and load show files, load User Fixture Types
(UFT) from memory stick, clear UFTs from the desk, update the desk software and display
desk information.
Saving Shows
To save a copy of your show, you first need a storage media. The Leap Frog 48/96 desk
is supplied with a USB flash memory stick, although other storage media may be used with
the console. Connect your media to a USB port on the desk (any port will do). If using an
external floppy drive, remember to insert a floppy disk into the drive.
Press the [Files] MFK or select the [Files] button on the Setup Window.
Press the [Save Show] MFK or select the [Save Show] button on the monitor. The Save
Show window is displayed on the monitor:
Select the required Destination Device.
Move to the Filename field and enter a name for the show file. This name will be used as
the file name on the destination device, so ensure it is unique and easily identifiable. The
name can be entered using the MFKs – hold SHIFT to enter a lowercase character.
Select the required Save Options. This defaults to Save Complete Show but you can just
save the Setup or Setup and Palettes if required.
Press the [OK] button to save the show.