Instruction manual

Setup
Page 64 Leap Frog 48/96 Operating Manual – Issue 3
Submaster Defaults
Press the [Submaster Defaults] MFK or select the [Submaster Defaults] button on the
monitor. The options are shown on the MFKs and monitor and are summarised below:
• Flash Button Action – Flash, Solo, Latch, Go or Off
• Trigger Level Units – Percentage or DMX.
• Trigger Level – This is the point at which the moving light attribute parameters are
triggered on a submaster.
• Intensity Fade Up
• Intensity Fade Down
• Colour Fade
• Beamshape Fade
• Position Fade
• Submaster Controls … - These options determine which of the attributes (Colour,
Beamshape etc.) are controlled by the physical position of the submaster fader :