Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 63
Memory Defaults
Press the [Memory Defaults] MFK or select the [Memory Defaults] button on the monitor.
The various options are shown on the MFKs and monitor and are summarised below:
• Intensity Delay Up/Down
• Intensity Fade Up/Down
• Colour Delay/Transition
• Beamshape Delay/Transition
• Position Delay/Transition
• Move on Dark – When a fixture is programmed at 0%, the memory stack will look
ahead to find the next required position, colour and beamshape, and automatically
move the fixture to these values in preparation for the fade up.
• Move on Dark Delay/Fade – The delay and fade times applied to the above
functionality. Note that these times apply from the completion of a previous fade.