Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 61
Outputs
Press the [Outputs] MFK or button on the monitor. The various options are shown on the
MFKs and monitor and are summarised below:
• DMX Output 1 and DMX Output 2 – The two DMX outputs on the rear of the desk.
Can be configured as Universes 1 to 4, individually. Default is Universe 1 from Output
1 and Universe 2 from Output 2. By setting both outputs to the same universe, the
desk will behave as a DMX splitter, giving the same signal from both ports.