Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 59
Peripheral
Press the [Peripheral] MFK or select the [Peripheral] button on the monitor. The various
options are shown on the MFKs and monitor and are summarised below:
• Mouse Controls Pan/Tilt - If the mouse or trackball is set to control pan and tilt
parameters, this will only take effect when fixtures are selected and the Position
attribute is selected. In this situation, the mouse pointer is removed temporarily from
the monitor screen. In all other situations, the mouse or trackball operation will remain
unaffected.
• Wheel Sensitivity – Adjusts the sensitivity of the three control wheels on the front
panel. 0% is least sensitive, whilst 100% is most sensitive.