Instruction manual

Setup
Page 58 Leap Frog 48/96 Operating Manual – Issue 3
Displays
Press the [Displays] MFK or select the [Displays] button on the monitor. The various
options are shown on the MFKs and monitor and are summarised below:
• Screen Timeout (mins) – This is the time after which the Main LCD, Wheel LCD, MFK
LCDs, Submaster LCDs and external monitor screen will be turned off if the desk has
not been used. If set to 0, the desk will never time out.
If the timeout period is reached - the front panel LCDs and monitor screen will be
turned off. To restore the LCDs and monitor screen, press any key on the front panel
of the desk.
• Main LCD Brightness and Contrast
• Other LCD Brightness and Contrast
• Monitor Calibration – Calibration of external touch screen monitor. With an external
touchscreen connected via USB, press the [Calibrate] soft key and follow the
instructions on the monitor.
The touchscreen drivers currently supported by Leap Frog 48/96 are:
o eGalax, eTurboTouch CT-410/510/700
o PanJit
o 3M/Microtouch EX II
o ITM
o eTurboTouch (non-eGalax compatible)
o Gunze AHL61
o DMC TSC-10/25