Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 57
Desk Setup
The Desk Setup function allows you to configure or customise the settings on the desk to
your own requirements. Desk Setup is divided into several sections which are accessed
by pressing the corresponding MFK or selecting the option on the monitor screen:
A summary of the Desk Setup options is provided below.
DisplaysAdjust the brightness and contrast of the Main LCD and other LCDs on the
front panel; calibration of external touch screen monitor; screen timeout.
Peripheral - Allow mouse or trackball to control pan and tilt parameters; adjust control
wheel sensitivity.
Inputs Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI Notes; Configure
Remote Switches
Outputs – Map DMX universe to physical DMX outputs on the desk.
Behaviour Confirm Overwrites; Recovery Mode; Preset Mixing; Keep Parameters
Separate options.
Memory Defaults Set up the default delay and fade times for each attribute
(Intensity, Colour, Beamshape, Position); Move on Dark parameters.
Submaster Defaults Set up default options for flash button action, trigger level and
attribute fade times.
Set Date – Set the date on the desk.
Set Time Set the time on the desk.