Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 51
Changing Fixture Type
This option allows you to swap one fixture type for another. Individual fixtures or groups of
fixtures may be changed in one operation.
The desk attempts to clone the programmed data for the swapped fixture(s) in memories,
submasters and palettes as far as possible. Parameters in the new fixture type that were
not present in the original fixture type are left unprogrammed.
Select the fixture(s) to be changed. Select the [Patch] button in the Edit Fixtures Window:
Under the Type column, select the [Change] button for the required fixture or the [Change]
button in the ALL row to change all of the selected fixtures.
Select the Manufacturer, Fixture Type and Mode (if applicable) using the MFKs or via the
popup window on the monitor and confirm the change type operation.
Deleting Fixtures
Press the [Delete] button on the monitor. A confirmation window is displayed. Click on the
[OK] button to delete the selected fixture(s).