Instruction manual
Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 47
Repatching Fixtures
Move the cursor to the DMX or Duplicate N column for the required fixture and press the
ENTER key. The Patch Fixture popup window is displayed on the monitor screen with the
current patch address in the DMX Address field, for example:
Select the Universe by clicking on the [Universe] button and selecting the universe from
the drop down menu.
Enter the required DMX address in the Address field provided or press the [Next Address]
button to automatically pick up the next available patch address in the selected universe.
Press the [OK] button to complete the patching operation or the [CANCEL] button to
cancel.
Unpatching Fixtures
Move the cursor to the DMX or Duplicate N column for the required fixture and press the
ENTER key. The Patch Fixture popup window will be displayed on the monitor screen with
the current patch address in the DMX Address field.
Press the [Unpatch] button. A confirmation popup window will be displayed. Select the
[Yes] button to comfirm the operation.