Instruction manual

Setup
Page 46 Leap Frog 48/96 Operating Manual – Issue 3
Patching Fixtures
Move the cursor to the DMX column for the required fixture and press the ENTER key.
The Patch Fixture popup window is displayed on the monitor screen, for example:
Select the Universe by clicking on the [Universe] button and selecting the universe from
the drop down menu.
Enter the required DMX address in the Address field provided or press the [Next Address]
button to automatically pick up the next available patch address in the selected universe.
Press the [OK] button to complete the patching operation or the [CANCEL] button to
cancel.
Adding Duplicates
Move the cursor to the Duplicate 1 column for the required fixture and press the ENTER
key. The Patch Fixture popup window is displayed on the monitor screen.
Select the Universe by clicking on the [Universe] button and selecting the universe from
the drop down menu.
Enter the required DMX address in the Address field provided or press the [Next Address]
button to automatically pick up the next available patch address in the selected universe.
Press the [OK] button to complete the patching operation or the [CANCEL] button to
cancel.
To patch further duplicates for the selected fixture move cursor to the Duplicate 2 Column,
Duplicate 3 column etc and repeat the above procedure.
When duplicates are patched for the selected fixture(s) additional columns are added to
the Edit Fixtures table (one column per duplicate address).