Instruction manual

Setup
Page 44 Leap Frog 48/96 Operating Manual – Issue 3
Selecting Fixtures to be Edited
Before carrying out any of the edit fixture operations - Select the fixture(s) to be edited
using the fixture selection keys (MFKs). As each fixture is selected it is added to the Edit
Fixtures screen on the monitor. Fixtures can be removed from this selection by pressing
their fixture selection key (MFK) at any time.
Editing Default / Home / Topset Values
Press the [Default] or [Home] or [Topset] button as required on the monitor (if not already
selected).
Use the cursor keys to move the cursor to the individual field to edit or use the ALL row to
edit the value for all of the selected fixtures.
Select the required field, press ENTER, enter the required value and press ENTER.
Once all changes have been made, press the [OK] key to return to the Patch screen.
If you make a mistake in Edit Fixtures, or simply wish to revert to the original values from
the fixture library then press the [Reset All] key. If you wish to cancel all editing of the
fixtures, press the [Cancel] key.
Editing Alignment
Press the [Alignment] button on the monitor. Use the cursor keys to move the cursor to
the individual field to edit or use the ALL row to edit the value for all the selected fixtures.
Select the required field and press ENTER.
Select the Yes or No option as required and press ENTER.
Once all changes have been made, press the [OK] key to return to the Patch screen.