Instruction manual

Setup
Leap Frog 48/96 Operating Manual – Issue 3 Page 41
Selecting a Fixture – Manufacturer, Fixture Type and Mode
Press [Add Fixtures], then select the first letter for the required manufacturer (eg M) then
the manufacturer (eg MARTIN) using the MFKs or directly from the list on the popup
window on the monitor.
The MFKs and monitor then displays a list of fixture types for that manufacturer. Some
manufacturers have more than 20 fixture types, in which case the MFKs will need to be
paged in order to select the fixture you require. The Page Up/Down buttons are used to
select the required page.
Select the required fixture type (eg MAC 500) using the MFKs or directly from the list on
the popup window on the monitor:
If there are several operating modes for the selected fixture type these are displayed on
the MFKs and monitor screen. Select the required mode (eg Mode 4) and the desk will
load the fixture profile, ready for patching.