Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 37
Naming a Palette
Palettes can have a name, which is displayed on the LCD and in the Palette window. To
set the name, display the appropriate palette window on the monitor. Select a programmed
palette to be named. Press the NAME key. The Name Window is displayed on the
monitor:
Use the MFKs or external keyboard to enter the palette name as required, then select the
[OK] button to complete the operation.
Outputting a Palette
Select the required fixture(s). Press the COLOUR, BEAMSHAPE or POSITION key to
make the MFKs Palette Selection Keys. Use the PAGE UP or PAGE DOWN key to select
the required page, if necessary. To output the palette, press the Palette MFK and the data
will be output for the selected fixture(s).
Note – Outputting a Palette over Time
Holding down the TIME key and pressing a palette MFK will crossfade to the palette output
values in the internal Fade Time. The internal Fade Time can be found and adjusted on
Special Page 1 of the MFKs.