Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 35
Controlling Colour, Beamshape and Position Parameters
The colour, beamshape and position parameters of the selected fixture(s) are controlled
using the control wheels. First select the required fixture(s) and then press one of the
attribute keys (COLOUR, BEAMSHAPE or POSITION).
The corresponding parameters for the fixture(s) are assigned to the control wheels and are
indicated on the Wheel LCD.
If the fixture has more than three controllable parameters for the selected attribute, press
the attribute key again to select the next group of parameters.
Tagging Parameters
On the Leap Frog 48/96 desk fixture parameters must be ‘tagged’ for them to be recorded.
The tag status of each fixture parameter is indicated on the Wheel LCD (inverse video
indicates tagged) and in the Program Window by it’s background colour (green indicates
tagged).
If a parameter’s value is changed by moving the control wheel, homing the fixture,
applying a palette or directly in the Program Window, it will be tagged automatically.
It is possible to tag and untag fixture parameters manually by holding down the CLEAR
key and moving the corresponding control wheel or fader.