Instruction manual

Quick Start Guide
Page 32 Leap Frog 48/96 Operating Manual – Issue 3
Desk Setup
The Desk Setup function allows you to configure or customise the settings on the desk to
your own requirements.
Desk Setup is divided into a number of different sections which are accessed by pressing
the corresponding MFK or soft button on the monitor.
A summary of the Desk Setup options is provided below. For full details of the various
options refer to the Setup chapter in the User Manual.
• Displays – Adjust the brightness and contrast of the Main LCD and other LCDs on the
front panel; calibration of external touch screen monitor; screen timeout.
• Peripheral - Allow mouse or trackball to control pan and tilt parameters; adjust control
wheel sensitivity.
• Inputs – Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI Notes; Configure
Remote Switches.
• Outputs – Map DMX universe to the physical DMX outputs on the desk.
• Behaviour – Confirm Overwrites; Recovery Mode; Preset Mixing; Keep Parameters
Separate options.
• Memory Defaults – Set up the default delay and fade times for each attribute
(Intensity, Colour, Beamshape, Position); Move on Dark parameters.
• Submaster Defaults – Set up default options for flash button action, trigger level and
attribute fade times.
• Set Date – Set the date on the desk.
• Set Time – Set the time on the desk.