Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 31
Assigning Fixture Type to MFKs
Having selected the required fixture type and specified a DMX start address, you now tell
the desk where you would like these fixtures to be. Press the MFK for the fixture you
require – the LCD above it will change to show the fixture assigned to the MFK and the
DMX address for this fixture. There are 10 pages of 20 fixtures available.
When you have assigned the fixture type to the required fixture selection key(s), press
ENTER to return to the Patch options.
Note – Fixture Types
The complete Zero 88 Fixture Library is stored on the desk, but it is also possible to load
additional fixture types from memory stick. If the fixture type you require is not in the fixture
library on the desk you can import the fixture type – see Setup chapter of the User Manual
for full details.
Auto Menus
The desk can generate automatic groups, palettes and macros based on the different
fixture types that have been assigned.
To generate any or all of these items, press the [Auto Menus] MFK, then press [Create
Auto Groups], [Create Auto Palettes] or [Create Auto Macros] MFK.
For further details see the Setup chapter of the manual.