Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 29
Setting Up the Desk
Now you’ve grasped the basics of the desk, it’s time to venture into the Setup area of the
desk. Setup is used for all of the major functions on the desk, such as clearing out the
current show, loading in a new one, or adding moving lights to your show.
To get into Setup, press the SETUP key. The Setup Window is displayed on the monitor
screen with the Patch option selected as default :
Setup gives you access to the core settings for the desk such as the patch, default fade
times and output settings. As such you shouldn't normally need to enter the Setup area
during a show.
It is, however also used for saving and loading of show files and updating the desk
software, so you should be familiar with it even if you are only using generic lights.