Instruction manual

Quick Start Guide
Page 28 Leap Frog 48/96 Operating Manual – Issue 3
Program Window
The Program Window is central to the programming functionality on the Leap Frog 48/96
desk. It is recommended (but not mandatory) that the Program Window is displayed on
the monitor screen when setting up memories, submasters or palettes.
To display the Program Window on the monitor press the PGM WIN key. As you adjust
dimmer levels, select fixtures and adjust their parameters with the control wheels, or by
other methods, the corresponding information is shown in the Program Window.
The dimmer and fixture parameter data displayed in the Program Window can then be
recorded to memories, submasters or palettes as required.
The top part of the Program Window shows the dimmer channels. Tagged dimmer
channels are shown in red text, untagged dimmer channels in white text.
The currently selected fixtures are highlighted in yellow. Fixture parameters which are
tagged have a green background, those that are untagged have a grey background.