Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 27
Playing Back Submasters
Before playing back submasters, it is important to clear the Program Window by pressing
the CLEAR button. This prevents any unprogrammed data from affecting the outuput of
the submasters.
Raising a submaster fader will bring the data programmed on the submaster to the
outputs. For moving lights, the submaster will trigger at 5% a crossfade to the new values.
For generic lights, the submaster fader provides intensity control.
Page Overlay on Submasters
It is possible to output scene or chase data from several submasters on different pages at
the same time provided that they are not controlled by the same physical fader.
If the submaster page is changed while any of the submaster faders are up, or any of the
SUBMASTER FLASH buttons are being held down, the fader or button remains in control
of the original data and the outputs for the original submaster are held.
The new scene, chase or transferred memory associated with the fader or button is not
made available until the fader is brought back down to zero or the flash button is released.