Instruction manual

Quick Start Guide
Page 26 Leap Frog 48/96 Operating Manual – Issue 3
Editing Submasters
The easiest way to Edit a submaster is simply to use the Update function. With the
submaster active, make the changes you require using the preset faders and fixture
controls, then press Update. The MFKs will list all of the currently active submasters and
memories which can be updated, as well as any palettes. Select the Submaster to update,
and press OK. Clear the programmer and the update is complete.
Naming Submasters
A submasters name is displayed on the LCD above it. To set the name, press the
SUBMASTERS key to display the Submasters Window, then select a programmed
submaster to be named. Press the NAME key and the Name Window is displayed on the
monitor:
You can now use the MFKs to enter the submaster name as required and press [OK] to
complete the operation. The name will be displayed on the Submaster LCD, above the
fader.