Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 25
Submasters
Once you have set up a scene (or part of a scene) that you like you can then record that
onto a submaster.
Recording a Submaster
Press the SUBMASTERS key to display the Submasters Window, then select the
submaster number to be programmed by pressing the relevant flash button under the
submaster. Note that there are 20 pages of submasters available so check the page
indicator is on 1 before continuing.
To store the Submaster, simply press the RECORD key. The Submaster LCD will indicate
that a scene is stored onto the submaster, and the Program Window will be emptied.
Adjusting Fade Times
Default fade times for Intensity, Colour, Beamshape and Position are defined in Desk
Setup, and can be adjusted if required via the Submasters Window.
The fade times can be adjusted by moving the cursor to the required field in the
Submasters Window and using the control wheels, or by moving to the field on the
Submasters Window, pressing the ENTER key, typing in the time using the MFKs or
external keyboard and pressing ENTER. See the Submasters chapter in the User Manual
for full details.