Instruction manual

Quick Start Guide
Leap Frog 48/96 Operating Manual – Issue 3 Page 23
Editing Memories
You can make changes to a memory by loading it back into the Program Window. To do
this, press the MEMORIES key to display the Memories Window. Select the memory to be
edited, then press the LOAD key. The Load Options Window is displayed on the monitor:
Select the [OK] button to load the memory into the Program Window. The levels from this
memory will be output. Now you can make changes using the preset faders and fixture
controls, and press the UPDATE key. The Update Options Window is displayed on the
monitor. Select the [OK] button to complete the edit.
Naming Memories
Each memory can have a name associated with it. These are displayed in the memories
window and can be useful for reminding you of the contents of a particular memory.
To set the name, press the MEMORIES key to display the Memories Window. Select a
programmed memory to be named. Press the NAME key. The Name Window is displayed
on the monitor:
Use the MFKs to enter the memory name as required, then select the [OK] button to
complete the operation.