Instruction manual

Introduction
Leap Frog 48/96 Operating Manual – Issue 3 Page 19
RECORD - used for programming memories and submasters.
COPY - used to copy items from one location to another (eg memories, submasters,
groups, palettes etc.) Holding down SHIFT and pressing COPY is used to transfer a
memory onto a submaster.
INSERT - used to insert point memories, add or insert chase steps or add or insert
duplicates when patching dimmers and fixtures.
DELETE - used when deleting items (memories, submasters, groups, palettes etc.)
ENTER - used for completing commands and selecting ‘soft’ buttons on the Main LCD,
monitor screens and popup windows.
HOME - used as a quick method for setting all the parameters, or all the parameters for a
particular attribute to their home values. The Home values are found in the Edit Fixtures
table in Setup and can be adjusted as required.
GRAND MASTER - controls the final output values of all dimmer and fixture intensity
channels, resulting from the Program Window, Playback X and submasters. The Grand
Master level is displayed on the monitor screen.
BLACKOUT - reduces the outputs of all dimmer and fixture intensity channels to zero.
Pressing the BLACKOUT key toggles between active and not active. The red LED in the
BLACKOUT key flashes when blackout is active.
SHIFT - used in conjunction with various front panel controls to provide additional
functions, eg holding SHIFT and pressing the COLOUR key displays the Colour Palette
Window on the monitor.
Main LCD
The Main LCD provides part of the user interface on the front panel of the desk. The
content, layout, operation and other information displayed on this screen is dependent on
the current operation being carried out on the desk.
In Setup, the Main LCD acts as a guide showing where you are in the Setup menu
structure and gives instructions on what to do.
When the Memories or Submasters screen are selected, the Main LCD acts as a small
viewing portal on the Memories or Submasters window.
When any of the other main windows (Program Window, Outputs, Groups etc.) are
selected, the Main LCD displays a simple text message directing you to refer to the
monitor, plus the desk software version and other helpful information, for example:
Output Window
See Monitor for details
For help press
SHIFT & LEFT & RIGHT
support.zero88.com