Instruction manual

Introduction
Page 18 Leap Frog 48/96 Operating Manual – Issue 3
Other Keys and Controls
SETUP - used to enter Setup mode and display the Setup screen on the Main LCD and
monitor. Also used for exiting Setup mode.
MEMORIES - used to display the Memories screen on the Main LCD and monitor.
SUBMASTERS - used to display the Submasters screen on the Main LCD and monitor.
OUTPUTS - used to display the Outputs screen on the monitor.
PGM WIN - used to display the Program Window (programmer) on the monitor.
Cursor Keys (UP, DOWN LEFT, RIGHT) - used to move around the fields on the main
LCD (where appropriate) and/or the monitor screen. These buttons are equivalent to the
four cursor keys on an external keyboard (if fitted).
Plus (+) and Minus (-) - used to increment or decrement the value of the current selection.
NAME - used for naming memories, submasters, palettes etc.
TIME - used as a shortcut for moving the cursor to the various fade fields on the Memories
and Submasters screens. It is also used incombination with other keys to perform various
functions over the internal fade time (eg outputting palettes over a time).
LOAD - used for loading items such as memories, submasters or palettes into the Program
Window for editing.
CLEAR - used for clearing the Program Window. As soon as any changes are made to
the look in the Program Window, the LED in the CLEAR key is lit, to indicate that dimmer
or fixture parameter values have changed. Pressing the CLEAR key once will clear (undo)
all the operations made in the Program Window since the LED was first lit, except for the
fixture selection. The LED in the key goes out. Pressing the CLEAR key a second time
clears the fixture selection in the Program Window.
UPDATE - used to update loaded items or items modified in the Program Window.