Instruction manual

Technical Specification
Page 170 Leap Frog 48/96 Operating Manual – Issue 3
DMX Output
Four DMX universes each consisting of dual 5 pin XLR, isolated, with voltage protection
and data output indicator. Data on channels 1 – 512 only.
Connector Pin Number DMX Output
1 Signal Ground (0V)
2 DMX Drive Complement (1-)
3 DMX Drive True (1+)
4 Not Connected
5 Not Connected
Remote Switches (Optional Upgrade)
An 8 pin DIN connector providing six remote switch inputs.
The following table shows the relationship between the pin number on the remote switches
socket on the rear panel of the desk and the remote switch number.
Socket Pin Number Remote Switch
1 Switch 6
2 Switch 1
3 Switch 2
4 Switch 3
5 Switch 4
6 Switch 5
7 Not Used
8 0V Common Ground