Instruction manual

Technical Specification
Leap Frog 48/96 Operating Manual – Issue 3 Page 165
Technical Specification
Power Supply
A separate inline transformer with 4 pin male XLR connector on the desk. The desk is
fitted with a power on/off switch on the back panel.
Mains Voltage 90 – 253 VAC
Mains Frequency 47 – 63 Hz
Mains Inlet Connector CEE22
Power Consumption < 100 W
Connector Pin Number Power
1 0V
2 +5V DC @ 4 A
3 +12V DC @ 0.5 A
4 Not Connected
Shell GND
Audio
The desk has an audio port on the rear panel as a stereo ¼ inch jack socket. The bass
beat of the audio input is used to trigger chases with Bass drives.
Connections
Tip Left Channel
Ring Right Channel
Sleeve 0V Signal Ground