Instruction manual

Other Features
Leap Frog 48/96 Operating Manual – Issue 3 Page 157
Output Window
The Output Window displays the outputs which are coming from all areas of the desk
(Programmer, Playback X or Submasters).
To display the Output Window press the OUTPUTS key on the front panel.
There are a number of soft buttons at the top of the Output Window which determine the
format of the output data (see below).
Percent Button
Select the [Percent] button to display a drop down menu with the following options:
• Percent – When this option is selected all dimmer and fixture parameter values are
displayed as percentages (0-100% for both 8 bit and 16 bit parameters).
• DMX - When this option is selected all dimmer and fixture parameter values are
displayed as DMX values (0-255 for 8 bit parameters or 0-65535 for 16 bit parameters).
• Details (%) – When this option is selected the fixture parameter values are displayed
as the parameter detail names (eg Red, Gobo 1) where they are defined in the fixture
data. If parameter details are not defined, the window shows the numerical values in %.
• Details (DMX) – When this option is selected the fixture parameter values are
displayed as the parameter detail names (eg Red, Gobo 1) where they are defined in
the fixture data. If parameter details are not defined, the window shows the numerical
values in DMX (0-255 or 0 – 65535).