Instruction manual

Groups
Leap Frog 48/96 Operating Manual – Issue 3 Page 137
Groups
Introduction
The Leap Frog 48/96 desk provides 200 user definable Groups. Groups are most
commonly used when selecting fixtures and programming data to be recorded in
memories, submasters and palettes.
Automatic Groups - In Setup, there is an option to generate a set of automatic groups
based on the fixture types in the schedule. The desk generates an All Fixtures group, a
group for each fixture type in the schedule, including dimmers, plus an ‘odd’ and ‘even’
group for each different fixture type in the schedule.
User Defined Groups - In addition to the Automatic Groups, you can also create your own
groups of fixtures, eg Floor MACs, Left Stage Movers etc. User defined groups can be all
of the same fixture type or any combination of fixture types.
Group Window
To display the Group Window on the monitor, hold down the SHIFT key and press the
GROUP key.
The Group Window contains a soft button for each of the 200 groups. Each soft button
contains the following data: Group Number (1-200) and name, if defined. Unprogrammed
groups are indicated by a ‘*’ next to the group number. For example: