Instruction manual

Submasters
Leap Frog 48/96 Operating Manual – Issue 3 Page 131
Naming a Submaster
Press the SUBMASTERS key to display the Submasters Window on the Main LCD and
monitor. Select a programmed submaster to be named. Press the NAME key. The Name
Window is displayed on the monitor:
Use the MFKs or external keyboard to enter the submaster name as required, then select
the [OK] button to complete the operation.
Note – Naming a Submaster
An alternative way to name a submaster is to move the cursor to the Name field on the
Submasters Window, press the ENTER key, use the MFKs or external keyboard to enter
the submaster name and then press the ENTER key to complete the operation.
Deleting a Submaster
Press the SUBMASTERS key to display the Submasters Window on the Main LCD and
monitor. Select a programmed submaster to be deleted. Press the DELETE key. The
Delete Window is displayed on the monitor:
Select the [OK] button. A confirmation window is displayed. You can then confirm the
deletion or cancel the operation.