Instruction manual

Submasters
Page 130 Leap Frog 48/96 Operating Manual – Issue 3
Copying a Submaster
The Leap Frog 48/96 desk provides the facility to copy a submaster from one location to
another.
Press the SUBMASTERS key to display the Submasters Window on the Main LCD and
monitor.
Select a programmed submaster to be copied or an unprogrammed submaster to be
copied to. Press the COPY key. The Copy Window is displayed on the monitor:
If the selected submaster was programmed – the From field contains the selected
submaster, the To field contains the number of the next unprogrammed submaster; the
cursor is displayed in the To field.
If the selected submaster was unprogrammed – the From field contains the first
programmed submaster, the To field contains the selected submaster; the cursor is
displayed in the From field.
Enter the source (From) or destination (To) submaster number in the corresponding field
and then select the [OK] button to confirm the operation.
If the destination submaster is unprogrammed – the source submaster is copied to the
destination submaster.
If the destination submaster is programmed – a warning message is displayed. You then
have the option to overwrite the submaster or cancel the copy operation.